5
Daily Use
Using pureWash Pro
X2
is very easy. You simply operate your washing machine
according to the instructions provided by the manufacturer. The only difference is
that you ONLY use the cold water setting on your washer. If hot water is used it dilutes
and defeats the effectiveness of the oxidizers that the pureWash Pro X2 has introduced
into the wash water.
Turn Off Water During Non-Use
IMPORTANT: To avoid possible property damage due to flooding, turn off the water
supply to pureWash Pro
X2
during periods of nonuse. Operate your washer and
pureWash Pro
X2
only when you are at home. Set the in-line ball valve on the water
supply input to Closed/OFF whenever the unit is not in use.
Stains
Always pre-treat stains just as you would without pureWash Pro X2. For best results,
use pureWash Pre, our enzyme based pre-treatment. Laundry detergent may be used
in conjunction with pureWash Pro for heavily soiled clothing. Levels of 1/4 the normal
amount or less is sufficient.
How to tell pureWash Pro X2 is Working
You can easily tell if pureWash Pro
X2
is operating properly by viewing the water as it
flows through the clear tube behind the window on the unit. Bubbles should be visible
in the water as it flows through and the window should emit a blue glow. If you do not
see bubbles, please ensure that you have the proper Venturi Setting (Using the Flow
Rate Dial on the back of the unit) selected for your washing machine. High-efficiency
or front load washers should use the High-Efficiency Setting, but standard-efficiency
top-loading washers should use the Standard Setting. If the Standard Setting is used
on a high-efficiency washer, there likely will be no bubbles and you will not experience
the benefits of using pureWash Pro
X2
.
USING YOUR pureWash Pro
X2
To Next Page
Loading...
Need help?
General