GB
Viper TTL - English 7
Second Curtain Sync
When the high speed sync icon
20
is switched on, press
and hold button
B
again to switch on second curtain
sync - the icon
21
will switch on. Second curtain sync
appliestoallgroupsatthesametime
Toreturntonormalsync,pressandholdbutton
B
again,
until the icon
21
switchesoff
• For “Nikon” version, the Second Curtain Sync (Rear-
curtainsync)isnotcontrolledfromtheViperTTL.To
enableSecondCurtainSyncsetinthecameramenuto
Rear-curtainsync.Refertocameramanualformoreinfo
Always On
Press and hold the <SEL>
02
button and keep it pressed
whileyouswitchonthetransmitter.Thebatteryindicator
(
23
willash.TurnAdjustDial
03
until Always ON
22
is
displayed. Now turn OFF and ON
01
again to enable the
AlwaysONfeature.WhenAlwaysONtheViperTTLis
permanentlytransmittingasignal.
Battery Level
• ThetransmitterLCDshowsthelevelofthebatteryfor
thetransmitter
23
• To check the receiver battery level, check LED
11
whichashesgreentoindicatenormalpower
Viper TTL transmitter hot shoe
ThecameramountedViperTTLtransmitterhasabuilt
in hot shoe
07
.ASpeedlightttedtothishotshowwill
operate as Group
A
forCanonversionandGroup
M
for
Nikon version.
• For the Nikon version group (M) is controlled by the
settingofthecameraandnotcontrolledbyanyofthe
Viper TTL groups
DCM Digital Channel Matching
• Open channel -WhenyouusetheViperTTLforthe
rsttime,the2.4GHzwirelessconnectionisusinga
default“openchannel”.Thisallowsseveraltransmitters
toindividuallycontrolthesameselectionofreceivers.
The“openchannel”canbeusefulwhenusingseveral
cameraswiththesamelightingsystem.Butitisalso
morepronetootheroutsideinterferences
• DCM -DigitalChannelMatchingisamoresecure
codedwirelesssystemwhichwillavoidanyexternal
interferencebetweenViperTTLtransmitterand
receiver.Carryoutthefollowingsetuptomatchall