CONNECT SERIES SERVICE MANUAL
49
ENGLISH
Maintenance
Front Panel Removal
Note: Be sure power is o before removing front panel.
Step Picture Work instruction
5. Remove the right side plate.
Unscrew the screws that connect the
right side plate to the electric box and
the screws around the right side plate.
6. Install the right side plate
Screw up the screws around the right
side plate. Be careful to handle well the
clasps at the bottom of the right side
plate.
7. Install the front panel.
Install the front panel by mounting on 6
clasps on its both sides. Please note that
there is one screw on the lower right
side.
8. Install the grill.
Attach the grill back in place and tighten
up the screws.
To Next Page
Loading...
Need help?
General