CONNECT SERIES SERVICE MANUAL
63
ENGLISH
Maintenance
Front Panel Removal
Note: Be sure power is isolated before removing from panel.
Step Picture Work instruction
11. Install the upper cover
plate.
Tighten up the screws around the upper
cover plate.
Model: AUH4860ZGDA
Compressor Disassembly
Note: Be sure the refrigerant is recovered and power is isolated before removing the compressor.
Step Picture Work instruction
1. Remove wires.
Loosen the securing screws of the wires
with a screwdriver.
Remove the wires.
Note: When removing the wires, mark
the wire terminals corresponding
to their color so as to avoid
misconnection.
2. Loosen the securing screws
at the foot of compressor.
Use a wrench to twist o the screw
nuts at the foot of compressor.
To Next Page
Loading...
Need help?
General