Haier HLPW028BXW User Manual

STEP 5 - CONNECT THE WATER HOSES
Depending on your model, the water hoses provided will be either Style 1 or Style 2.
Follow the instructions
specic to the style of water hoses provided.
IMPORTANT: Use only new hoses when installing the washer. The water hoses
must have coarse thread connectors on one end (to connect to the household
water supply), and ne thread connectors on the other end (to connect to the
washing machine).
NOTE:
•
Periodically inspect hoses for cracks, cuts, leaks or wear. Replace with new
hoses every 5 years.
•
Hot water needs to be set at a temperature of at least 120ºF - 140ºF. (49ºC-
60ºC) for the soap to dissolve and to avoid soap residue remaining on
clothes.
1. Check that a at washer is present and rmly in place in each end of the water
inlet hoses.
Style 1
a
Style 2
a
A
Washer
2. Thread the white end of the inlet hose by hand onto the COLD water inlet valve
on the back of the washer until rmly hand tightened.
IMPORTANT:
•
Do not connect the gray end of the inlet hose to the washer. You will
damage the threads and it will leak.
•
To avoid damage to the hose couplings, do not overtighten.
Style 1 - Using pliers, tighten the connection an additional two-thirds turn
(MAXIMUM). Do not use excessive force.
Style 2 - Do not use pliers to tighten the connection.
NOTE: To avoid damage to the washer inlet valves, do not use plumber’s
tape or sealants on the valve threads.
Style 1
Cold Water
Hot Water
a
Style 2
Cold Water
Hot Water
a
A
White End Only
3. Determine installation type.
17
ENGLISH

Haier HLPW028BXW Specifications

General

Brand	Haier
Model	HLPW028BXW
Category	Washer
Language	English