8
AUDIO INPUTS
The EON ONE Compact has four inputs: two mono MIC/LINE inputs on XLR combo jacks, one dedicated 1/4"
HI-Z input for direct connection of an instrument (such as an acoustic guitar), and one 3�5mm AUX input, which is
summed with the Bluetooth audio streaming input� All of the inputs are routed to the speaker, HEADPHONE jack,
and PASS THRU output jack�
If using a condenser microphone, MIC/LINE 1 must be used and phantom power must be enabled� See
"Phantom Power Disclaimer" on page 9 for important information on using phantom power�
SWITCHING MODES & EDITING CHANNEL PARAMETERS
The EON ONE Compact can operate in one of two different modes: CHANNEL MODE or MIX MODE� The mode
can be selected by pressing the CH SELECT button button until all CHANNEL LEDs are lit� When in CHANNEL
MODE, pressing the CH SELECT button will select the channel to edit, indicated by the CH1-CH4 LEDs� Once
a channel is selected, adjusting a parameter will affect the selected channel� In MIX MODE (CH1-CH4 LEDs lit)
the four rotary controls (1-4) can be used to adjust each channel's gain respectively for quick adjustment of mix
levels�
*NOTE: When the DUCKING button is enabled, channels 1 and 2 provide the sidechain signal for the ducker,
which will automatically attenuate the channel 4 (AUX and Bluetooth) signal levels whenever signal is present
on either of the MIC inputs� This feature is ideal for ducking playback music in presentation and instruction
applications�
In CH MODE, adjusts the
selected channel's high
frequencies; in MIX MODE,
adjusts the CH2 gain
In CH MODE, adjusts the
selected channel's gain;
in MIX MODE, adjusts the
CH1 gain
MASTER VOLUME control
adjusts the overall output
level
In CH MODE, adjusts the
selected channel's low
frequencies; in MIX MODE,
adjusts the CH3 gain
In CH MODE, adjusts the
selected channel's reverb
amount; in MIX MODE,
adjusts the CH4 gain
Combination 1/4" phone
(line) and XLR female (mic)
input connectors
3�5mm HEADPHONE output
PASS THRU output for
connecting additional
JBL EON ONE Compact
speakers
DUCKING on/off button*
1/4" HI-Z phone jack for
connecting an instrument
3�5mm AUX input for
connecting a mobile device
MIC/LINE button selects
between a microphone
(XLR) input or a line (1/4"
phone) input
CH SELECT button is used
to select a channel for
editing or to switch between
modes