Harman® • P-Series Installation Manual_R18 • 2014 - ___ • 06/184 3-90-436168i
A. Appliance Certication B. Glass Specications
This appliance is equipped with 5mm mirrored ceramic
glass. Replace glass only with 5mm ceramic glass. Please
contact your dealer for replacement glass.
C. Mobile Home Approved
This appliance is approved for mobile home installations
when not installed in a sleeping room and when an outside
combustion air inlet is provided.
Thestructuralintegrityofthemobilehomeoor,ceiling,and
walls must be maintained. The appliance must be properly
grounded to the frame of the mobile home and use only listed
pellet vent, Class “PL” connector pipe.
A Harman
®
OutsideAirKitmustbeinstalledinamobilehome
installation.
NOTE: This installation must conform with local codes.
In the absence of local codes you must comply with
the ASTM E1509-2004, ULC-S627-00, ULC/ORD-C-
1482-M1990, (UM) 84-HUD
The P43, P61AandP68areCertiedto
comply with 2015 particulate emission
standards. Not approved for sale after
May 15, 2020.
1
Product Specic and Important Safety Information
MODEL: P43 Pellet Stove
LABORATORY: OMNITestLaboratories,Inc
REPORT NO. 135-S-23-4, 135-S-23b-6.2
TYPE: Pellet Fueled/Supplementary For
Residential Use
STANDARD(s): ASTME1509-04,ULC/ORD-
C1482-M1990, ULC-S627-00, EPA
Method 28 & 5G
MODEL: P61A Pellet Stove
LABORATORY: OMNITestLaboratories,Inc
REPORT NO. 135-S-22-4, 135-S-22b-6.2
TYPE: Pellet Fueled/Supplementary For
Residential Use
STANDARD(s): ASTME1509-04,ULC/ORD-
C1482-M1990, ULC-S627-00, EPA
Method 28 & 5G
MODEL: P68 Pellet Stove
LABORATORY: OMNITestLaboratories,Inc
REPORT NO. 135-S-13-2, 135-S-13b-2,
135-S-13c-6.2
TYPE: Pellet Fueled/Supplementary For
Residential Use
STANDARD(s): ASTME1509-04,ULC/ORD-
C1482-M1990, ULC-S627-00, EPA
Method 28 & 5G
THE STRUCTURAL INTEGRITY OF THE
MANUFACTURED HOME FLOOR, WALL, AND
CEILING/ROOF MUST BE MAINTAINED.
DO NOT INSTALL IN SLEEPING ROOM.
WARNING
To Next Page
Loading...
Need help?
General
