Thermal Monocular User Manual
18
5.3 Burning Prevention
This function can prevent the detector of the thermal channel from being burned. When this
function is enabled, the shield will close if the grey scale of the detector reaches a certain value.
Steps
1. Hold to show the menu.
2. Select , and press to enable or disable the burn-prevention function.
Note
Avoid direct sunlight and enable the burning prevention function to reduce the risk of sensor
damage from the heat.
5.4 Capture and Video
5.4.1 Capture Picture
On the main live view page, press to capture picture.
Note
When capturing succeeds, the image freezes for 1 second and a prompt shows on the display.
For exporting captured pictures, refer to Export Files.
5.4.2 Record Video
Steps
1. In the main live view, hold and start recording.
Figure 5-2 Start Recording
To Next Page
Loading...
Need help?
General
