Thermal Image Scope User Manual
10
3.3 Adjust Brightness
In the menu mode, rotate the wheel to select and press the wheel to adjust brightness. In
white hot mode, the higher the value of brightness is, the brighter the image is. The image effect
in white hot mode is showed as picture below and effect in black hot mode is opposite.
Figure 3-3 Adjust Brightness in White Hot Mode
3.4 Adjust Contrast
In the menu mode, rotate the wheel to select and press the wheel to adjust image contrast.
3.5 Select Scene Mode
You can select proper scene mode according to actual using scene to improve the display effect.
Steps
1. Hold the wheel to go to the menu.
2. Rotate the wheel to select and press the wheel to switch scene mode.
– refers to recognition mode and is recommended in normal scene.
– refers to jungle mode and is recommended in hunting environment.
3. Hold the wheel to save settings and exit.
3.6 Set Palettes
You can select different palettes to display the same scene in different effects. Press in live
view mode to switch palettes.
White Hot
The hot part is light-colored in view. The higher the temperature is, the lighter the color is.
To Next Page
Loading...
Need help?
General
