Hikmicro STELLAR Series User Manual

Thermal Image Scope User Manual
12
3.7 Correct Defective Pixel
The device can correct the defective pixels on the screen.
Steps
1. Hold the wheel to show the menu.
2. Rotate the wheel to select , and press the wheel to enter the DPC setting interface.
3. In the DPC Interface, rotate the wheel to select Axis, and press the wheel to switch the moving
direction of the cursor.
4. Rotate the wheel to move the cursor until it reaches the defective pixel, and press the wheel to
confirm.
5. Rotate the wheel to select DPC, and press the wheel to correct the defective pixel.
Note
● The selected defective pixel can be magnified and displayed at the bottom right of the
interface.
Figure 3-4 Correct Defective Pixel
● When the menu or OSD blocks the defective pixel, the menu at the bottom can be hidden,

Hikmicro STELLAR Series Specifications

General

Brand	Hikmicro
Model	STELLAR Series
Category	Thermal cameras
Language	English