Hikmicro STELLAR Series User Manual

Thermal Image Scope User Manual
20
Chapter 6 General Settings
You can manually record video or capture picture when displaying live view.
6.1 Set OSD
You can choose whether to display the OSD information on the live view mode.
Steps
1. Hold the wheel to show the menu.
2. Rotate the wheel to select , and press the wheel to enter the OSD setting interface.
3. Rotate the wheel to select the OSD information you want to display or not.
4. Press the wheel to enable or disable the selected OSD information.
6.2 Set Brand Logo
You can add brand logo on the live view mode.
Steps
1. Hold the wheel to show the menu.
2. Rotate the wheel to select .
3. Press the wheel to enable or disable Brand Logo.
4. Hold the wheel to save and exit.
Result
The brand logo is displayed at the bottom right of the image.
Figure 6-1 Brand Logo Display
Note
The brand logo is only displayed on the live view mode, captures and videos.

Hikmicro STELLAR Series Specifications

General

Brand	Hikmicro
Model	STELLAR Series
Category	Thermal cameras
Language	English