Hikmicro THUNDER 2.0 Series User Manual

Thermal Image Scope User Manual
19
Note
● When you switch the zeroing No., a prompt will appear on the interface. Select OK to save
the parameters for the current reticle.
● When enabling the freeze function in reticle, you can adjust the position of the cursor on a
frozen image. This function can prevent image flutter.
Figure 4-3 Correct Reticle
5. Trigger an activation again to verify that verify that the aiming point aligns with the point of
impact.
6. Hold to exit the interface according to the prompt.
– OK: Save the parameters and exit.
– CANCEL: Exit but not save the parameters.
4.3 Set Reticle Style
You can select color and type for your reticle in different environments.
Before You Start
Select a zeroing No.
Steps
1. In the zeroing interface, press or to select or and press to confirm.
2. Press or to switch types or colors for your reticle, and press to confirm. You can
set 10 types of reticles and choose the reticle colors from Black, White, Green, and Red.
3. Hold to save the settings according to the prompt.

Hikmicro THUNDER 2.0 Series Specifications

General

Brand	Hikmicro
Model	THUNDER 2.0 Series
Category	Thermal cameras
Language	English