User Manual of 9600/8600/7700/7600 Series NVR
108
7.1.3 Backing up Video Clips
Purpose:
You may also select video clips to export directly during Playback, using USB devices (USB flash drives, USB
HDDs, USB writer) or SATA writer.
Steps:
1. Enter Playback interface.
Please refer to Chapter 7.1 Playing Back Record Files.
2. During playback, use buttons and in the playback toolbar to start or stop clipping record file(s).
3. Quit Playback interface after finishing clipping and you will then be prompted to save the clips.
Note: A maximum of 30 clips can be selected for each channel.
Figure 7. 20 Interface of Playback by Time
4. Click Yes to save video clips and enter Export interface, or click No to quit and do not save video clips.
Figure 7. 21 Attention to Video Clip Saving
5. Export.
Click Export button and start backup.
Note: If the inserted USB device is not recognized:
• Click the Refresh button.
• Reconnect device.
• Check for compatibility from vendor.
You can also format USB flash drive or USB HDDs via the device.
To Next Page
Loading...
Need help?
General