User Manual of 9600/8600/7700/7600 Series NVR
147
Note: Click if the connected local backup device cannot be displayed. When it fails to
detect the backup device, please check whether it is compatible with the NVR. You can format the backup
device if the format is incorrect.
Figure 9. 33 Export Network Packet
4. Click to start exporting.
5. After the exporting is complete, click OK to finish the packet export, as shown in Figure 9. 34.
Figure 9. 34 Packet Export Attention
Note: Up to 1M data can be exported each time.
9.4.3 Checking the network status
Purpose:
You can also check the network status and quick set the network parameters in this interface.
Steps:
Click button on the bottom right corner of the page.
To Next Page
Loading...
Need help?
General