HIKVISION AX DS-PWA32-HG User Manual

Note
• Set the device port No. as 80.
• The user name and password when adding device are the
acvaon user name and
password.
3. Click
to enter the Remote Conguraon page aer the device is completely added,
4.3 Use the Web Client
Steps
1. Connect the device to the Ethernet.
2. Search the device IP address via the client
soware and the SADP soware.
3. Enter the searched IP address in the address bar.
Note
When using mobile browser, the default IP Address is 192.168.8.1. The device must be in the AP
mode.
Note
When connecng the network cable with computer directly, the default IP Address is 192.0.0.64
4. Use the acvaon user name and password to login.
Note
Refer to Acvaon chapter for the details.
4.3.1 Communicaon Sengs
Wired Network
If the device is linked to the wired network, you can set the wired network parameters when you
want to change the device IP address and other network parameters.
Steps
Note
The funcon is not supported by some device models.
1. In the client soware, enter the Device Management page.
2. Select the device in the Device for Management list, click Remote
Conguraon.
3. Click Communicaon Parameters → Ethernet to enter the Wired Network Parameters page.
AX Security Control Panel
18

HIKVISION AX DS-PWA32-HG Specifications

General

Brand	HIKVISION
Model	AX DS-PWA32-HG
Category	Control Panel
Language	English