HIKVISION AX DS-PWA32-HG User Manual

Chapter 5 Operaons
You can use the client keyfob, card, client soware, or mobile client to do arming, disarming,
bypass, and zone disabling.
5.1 Arming
You can use keypad, keyfob, card, client
soware, mobile client to arm your system.
Aer the arming command is sending to control panel, the sytem will check the detector status. If
the detector is in fault, you will need to choose whether to arm the system with fault.
While the system is armed, the control panel will prompt the result in 5s, and upload the arming
report.
Figure 5-1 Arming Process
Access level of Arming
The user in level 2 or 3 has the permission to arm or partly arm the system.
Arming Indicaon
The arming/disaring indicator keeps solid blue for 5s.
AX Security Control Panel
80

HIKVISION AX DS-PWA32-HG Specifications

General

Brand	HIKVISION
Model	AX DS-PWA32-HG
Category	Control Panel
Language	English