AX PRO User Manual
1
Chapter 1 Introduction
1.1 System Description
AX Pro is a wireless alarm system designed to protect premises required for proper protection
from intrusion alarm. It supports LAN /Wi-Fi as the primary transmission network, and
GPRS/3G/4G LTE as the secondary transmission network. The system is applicable to the scenarios
of market, store, house, factory, warehouse, office, etc.
● Innovative Tri-X 2-way wireless technology.
● Two-way communication with AES-128 encryption.
● Frequency-hopping spread spectrum (FHSS) is used to avoid interference, to prevent
eavesdropping, and to enable code-division multiple access (CDMA) communications.
● Voice guide for alarm alert, system status indication, operation prompt, etc.
● Configuration via web client, mobile client, and Convergence Cloud.
● Pushes alarm notification via messages or phone calls.
● Views life videos from Hik-Connect and alarm video clips via emails, Hik-ProConnect, and Hik-
Connect.
● Uploads alarm reports to ARC.
● SIA-DC09 protocol, and supports both Contact ID and SIA data format.
● 4520 mAh lithium backup battery with 12 H standby duration.
Ordering
To Next Page
Loading...
Need help?
General
