User Manual of Network Camera
118
Chapter 14 Picture
Click Picture to enter the picture searching interface. You can search, view, and
download the pictures stored in the local storage or network storage.
Notes:
Make sure HDD, NAS or memory card are properly configured before you
process the picture search.
Make sure the capture schedule is configured. Go to Configuration > Storage >
Schedule Settings > Capture to set the capture schedule.
Figure 14-1 Picture Search Interface
Steps:
Select the File Type as Continuous, Motion or Alarm.
(1) Select the file type, start time, and end time.
(2) Click Search. The results will be listed on the picture list area.
(3) Select one picture and click Preview to preview the picture.
(4) Check the checkbox of each picture, and click Download to download the
selected pictures.
Select the File Type as Vehicle Detection.
(1) Select the file type, start time, and end time. You can also input the plate number
to narrow down the searching.
To Next Page
Loading...
Need help?
General
