HIKVISION DS-2CD5165G0-IZS User Manual

Network Camera User Manual
Scene Change Detection
2. Check the checkbox of Enable to enable the function.
3. Click-and-drag the slider to set the detection sensitivity. The sensitivity value
ranges from 1 to 100, and the higher the value is, the more easily the change of
scene can trigger the alarm.
4. Click Arming Schedule to set the arming schedule. Refer to Task 2 Set the
Arming Schedule for Motion Detection in Section 10.1.1 for detailed steps.
5. Click Linkage Method to select the linkage methods for scene change, including
Notify Surveillance Center, Send Email, Upload to FTP/Memory Card/NAS,
Trigger Channel and Trigger Alarm Output.
6. Click Save to save the settings.
Configuring Face Detection
Purpose:
Face detection function detects the face appears in the surveillance scene, and some
certain actions can be taken when the alarm is triggered.
Steps:
122
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com

HIKVISION DS-2CD5165G0-IZS Specifications

General

Brand	HIKVISION
Model	DS-2CD5165G0-IZS
Category	Security Camera
Language	English