To Next Page

To Previous Page

Network Camera User Manual

encryption password is required when you import the file to other cameras.

Diagnose Information: click to download log and system information.

 Import Config. File

Configuration file is used for the batch configuration of the cameras.

Steps:

1. Click Browse to select the saved configuration file.

2. Click Import and input encryption password to start importing configuration

file.

Note: You need to reboot the camera after importing configuration file.

 Upgrade: Upgrade the device to a certain version.

Steps:

1. Select firmware or firmware directory to locate the upgrade file.

Firmware: Locate the exact path of the upgrade file.

Firmware Directory: Only the directory the upgrade file belongs to is

required.

2. Click Browse to select the local upgrade file and then click Upgrade to start

remote upgrade.

Note: The upgrading process will take 1 to 10 minutes. Please don't disconnect

power of the camera during the process, and the camera reboots automatically

after upgrade.

Log

Purpose:

The operation, alarm, exception and information of the camera can be stored in log

files. You can also export the log files on your demand.

Before you start:

Please configure network storage for the camera or insert a SD card in the camera.

Steps:

1. Enter log searching interface: Configuration > System > Maintenance > Log.

Available from A1 Security Cameras

HIKVISION DS-2CD5165G0-IZS User Manual

Questions and Answers: