HIKVISION DS-2CD5165G0-IZS User Manual

Network Camera User Manual
Setting/Calling a Preset
 Setting a Preset:
1. In the PTZ control panel, select a preset number from the preset list.
Setting a Preset
2. Use the PTZ control buttons to move the lens to the desired position.
• Pan the camera to the right or left.
• Tilt the camera up or down.
• Zoom in or out.
• Refocus the lens.
3. Click to finish the setting of the current preset.
4. You can click to delete the preset.
 Calling a Preset:
This feature enables the camera to point to a specified preset scene manually or when
an event takes place.
For the defined preset, you can call it at any time to the desired preset scene.
In the PTZ control panel, select a defined preset from the list and click to call the
preset.
Or you can place the mouse on the presets interface, and call the preset by typing the
preset No. to call the corresponding presets.
39
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com

HIKVISION DS-2CD5165G0-IZS Specifications

General

Brand	HIKVISION
Model	DS-2CD5165G0-IZS
Category	Security Camera
Language	English