Network Camera User Manual
1. Check the checkbox of Rule to enable rules of face capture.
2. Click the rectangle sign to draw the minimum pupil distance. The
distance of the drawn pupil will be displayed on the box below the live view.
The minimize pupil distance refers to the minimum square size composed by
the area between two pupils, and it is the basic standard for a camera to
identify a target.
3. Click the hexagons sign to draw the detection area you want the face
capture to take effect. Draw area by left click end-points in the live view
window, and right click to finish the area drawing.
Notes:
Polygon area (4~10 sides) sides is supported.
If the live view is stopped, there is no way to draw the configured area.
4. Click Save to save the settings.
Advanced Configuration
Face Capture Version: It lists the version of the algorithms library.
Configure the following parameters according to your actual environment.
Face Capture-Advanced Configuration
Detection Parameters:
Generation Speed [1~5]: The speed to identify a target. The higher the value, the
145
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
To Next Page
Loading...
Need help?
General
