© Hikvision
5. Click to save the settings.
Note:
The two functions are not enabled by default.
6.4 Configuring System Settings
6.4.1 System Settings
Viewing Basic Information
Enter the Device Information interface:
Configuration > System > System Settings > Basic Information
In the Basic Information interface, you can edit the Device Name and Device No.
Other information of the camera, such as Model, Serial No., Firmware Version, Encoding Version,
Web Version, Plugin Version, Number of Channels, Number of HDDs, Number of Alarm Input,
Number of Alarm Output, and Firmware Version Property are displayed. The information cannot
be changed in this menu. It is the reference for maintenance or modification in future.
Figure 6-42 Device Information
Time Settings
Purpose:
You can follow the instructions in this section to configure the time which can be displayed on the
video. There are Time Zone, Time Synchronization, and Daylight Saving Time (DST) functions for
setting the time. Time Synchronization consists of auto mode by Network Time Protocol (NTP)
server and manual mode.
To Next Page
Loading...
Need help?
General
