Digital Video Recorder User Manual
198
For more operation instructions, please refer to the help file on the official website
(dev.hicloudcam.com).
12.2.3 Configuring DDNS
Purpose
If your DVR is set to use PPPoE as its default network connection, you may set Dynamic DNS (DDNS)
to be used for network access.
Prior registration with your ISP is required before configuring the system to use DDNS.
Step 1 Enter the Network Settings interface.
Menu > Configuration > Network
Step 2 Select the DDNS tab to enter the DDNS Settings interface.
Step 3 Check the Enable DDNS checkbox to enable this feature.
Step 4 Select DDNS Type. Five different DDNS types are selectable: IPServer, DynDNS, PeanutHull,
NO-IP and HiDDNS.
IPServer: Input Server Address for IPServer.
Figure 12-4 IPServer Settings Interface
DynDNS:
1) Enter Server Address for DynDNS (i.e. members.dyndns.org).
2) In the Device Domain Name text field, enter the domain obtained from the DynDNS
website.
3) Enter the User Name and Password registered in the DynDNS website.
To Next Page
Loading...
Need help?
General