HIKVISION DS-7108HQHI-K1 User Manual

Digital Video Recorder User Manual
157
Chapter 11 VCA Search
With the configured VCA detection, the device supports the VCA search for the behavior search,
face search, plate search, people counting and heat map results of the IP cameras.
11.1 Face Search
Purpose
When there are detected face picture captured and saved in HDD, you can enter the Face Search
interface to search the picture and play the picture related video files according to the specified
conditions.
Before you start
Please refer to Chapter 9.1 Face Detection for configuring the face detection.
Step 1 Go to Menu > VCA Search > Face Search.
Step 2 Select the camera (s) for the face search.
Figure 11-1 Face Search
Step 3 Specify the start time and end time for searching the captured face pictures or video files.
Step 4 Upload the pictures from your local storage device for matching the detected face pictures.
Step 5 Set the similarity level for the source pictures and the captured pictures.
Step 6 Click Search to start searching. The search results of face detection pictures are displayed
in list or in chart.

HIKVISION DS-7108HQHI-K1 Specifications

General

BNC input ports	1
Video input channels	8 channels
USB 2.0 ports quantity	2
HDD interface	Serial ATA
Maximum HDD capacity	6000 GB
Power consumption (typical)	12 W
Voltage	12 V
Product color	White
Rack capacity	1U
Audio output channels	1.0 channels
Video compression formats	H.264, H.264+, H.265, H.265+
Ethernet LAN	Yes
Ethernet interface type	Fast Ethernet
Supported network protocols	TCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, NFS, iSCSI, UPnP, HTTPS, ONVIF
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Weight	1000 g
Dimensions (WxDxH)	200 x 200 x 45 mm