Digital Video Recorder User Manual
56
Playback: play back the recorded videos for current day.
Aux/Main Monitor: the DVR checks the connection of the output interfaces to define the
main and auxiliary output interfaces. When the aux output is enabled, the main output cannot
do any operation, and you can do some basic operation on the live view mode for the Aux
output.
For DVR with CVBS output, the VGA/HDMI output is the main output, and the CVBS output is the
aux output. The priority relationship is shown as Table 3-2.
Table 3-2 Priorities of Outputs
√ means the interface is in use, × means the interface is out of use or the connection is invalid. And
the HDMI, VGA and CVBS can be used at the same time.
3.2.1 Using the Mouse in Live View
You can refer to Table 3-3 for the description of mouse operation in live view mode.
Table 3-3 Mouse Operation in Live View
Enter the main menu of the system by right clicking the
mouse.
Switch to the single full screen by choosing channel number
from the drop-down list.
Adjust the screen layout by selecting from the drop-down list.
Switch to the previous screen.
Switch to the next screen.
Enable/disable the auto-switch of the screens.
The dwell time of the live view configuration must be set before using
Start Auto-Switch.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
