HIKVISION DS-7204HGHI-F1 User Manual

Digital Video Recorder User Manual
151
Chapter 8 Alarm Settings
8.1 Setting Motion Detection
Step 1 Enter Motion Detection interface of Camera Management and choose a camera you want
to set up motion detection.
Menu> Camera> Motion
Figure 8-1 Motion Detection Setup Interface
Step 2 Set detection area and sensitivity.
Check checkbox to enable motion detection. Use the mouse to draw detection area(s)
or click Full Screen to set the detection area to be the full screen and drag the sensitivity
bar to set sensitivity.
Click to set alarm response actions.
Figure 8-2 Set Detection Area and Sensitivity

HIKVISION DS-7204HGHI-F1 Specifications

General

Voltage	12 V
Product color	Black
Rack capacity	1U
Audio output channels	1.0 channels
Video compression formats	H.264, H.264+
Ethernet LAN	Yes
Ethernet interface type	Fast Ethernet
Ethernet LAN (RJ-45) ports	1
Supported network protocols	TCP/IP, PPPoE, DHCP, Hik Cloud P2P, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP, HTTPS
HDD interface	Serial ATA
Maximum HDD capacity	6000 GB
Video input channels	4 channels
USB 2.0 ports quantity	2
Power consumption (typical)	8 W
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Weight	1000 g
Dimensions (WxDxH)	260 x 222 x 45 mm