HIKVISION DS-7208HVI-S Series User Manual

HIKVISION DS-7208HVI-S & 7216HVI-S User‟s Manual
62
Figure 6. DDNS Settings Menu
4. Check the DDNS checkbox to enable feature.
5. Select DDNS Type. There are three different DDNS type to choose from, IpServer, PeanutHull and
DynDNS.
• IpServer: Enter Server Address for IpServer.
• PeanutHull: Enter User Name and Password obtained from the PeanutHull website (Figure 6).
• DynDNS: Enter Server Address for DynDNS (i.e. members.dyndns.org) (Figure 7). Under DVR
Domain Name, enter the domain obtained from the DynDNS web site. Lastly, enter the User
Name and Password registered in the DynDNS network.
Figure 7. DynDNS Settings
Configuring an NTP Server
A Network Time Protocol (NTP) Server may also be setup on your DVR to keep the date and time current and
accurate.
To setup an NTP server:
1. Enter the Network Settings menu by clicking Menu > Setting > Network.
2. Select the Advanced tab.

HIKVISION DS-7208HVI-S Series Specifications

General

Brand	HIKVISION
Model	DS-7208HVI-S Series
Category	DVR
Language	English