HIKVISION DS-7600NI Series User Manual

User Manual of DS-7600NI Series NVR
168
12.5 Restoring Default Settings
Steps:
1. Enter the Default interface.
Menu > Maintenance > Default
Figure 12. 14 Restore Factory Default
2. Click the OK button to restore the default settings.
Note: Except the network parameters (including IP address, subnet mask, gateway, MTU, default route and server
port), all other parameters of the device will be restored to factory default settings.

HIKVISION DS-7600NI Series Specifications

General

Brand	HIKVISION
Model	DS-7600NI Series
Category	Network Hardware
Language	English