Network Video Recorder User Manual
96
6.1.4 Playing Back by Event Search
Purpose
Play back videos on one or several channels searched out by event type (e.g., alarm input, motion
detection and VCA).
Step 1 Enter the Playback interface.
Menu > Playback
Step 2 Select the Event in the drop-down list on the top-left side.
Step 3 Select the major type to Alarm Input, Motion, or VCA as the event type.
We take playback by VCA as the example in the following instructions.
Figure 6-9 Event Search Interface
Step 4 Select the minor type of VCA from the drop-down list. (Please refer to Chapter 9 VCA Alarm
for the details of VCA detection types).
For configuring the VCA recording, please refer to Chapter 5.5 Configuring VCA Event Recording;
and for details of VCA detection types, please refer to Chapter 9 VCA Alarm.
To Next Page
Loading...
Need help?
General
