HIKVISION DS-9600 Series User Manual

User Manual of DS-9600/8600/7700/7600 Series NVR
179
10.4 Deleting Array / Virtual Disk
Note: Before deleting the array, the virtual disk(s) existing under this array must be deleted first. Deleting array
and virtual disk will cause to delete all the data saved in the disk.
10.4.1 Deleting the Virtual Disk
Steps:
1. Enter the Virtual Disk interface.
Menu>HDD>RAID>Virtual Disk
Figure 10. 25 Virtual Disk Interface
2. Select a virtual disk and click to delete the virtual disk.
Figure 10. 26 Confirm Virtual Disk Deletion
3. In the pop-up message box, click to confirm the virtual disk deletion.
Note: Deleting virtual disk will cause to delete all the data saved in the disk.
10.4.2 Deleting the Array
Note: If all the virtual disks existing under an array have been deleted, then you can delete that array.
Steps:
1. Enter the Array Settings interface.
Menu>HDD>RAID>Array

HIKVISION DS-9600 Series Specifications

General

Brand	HIKVISION
Model	DS-9600 Series
Category	Network Hardware
Language	English