User Manual of DS-9600/8600/7700/7600 Series NVR
71
5.2 Configuring Record/Capture Schedule
Purpose:
Set the record schedule, and then the camera automatically starts/stops recording according to the
configured schedule.
Note: In this chapter, we take the record schedule procedure as an example, and the same
procedure can be applied to configure schedule for both recording and capture. To schedule the
automatic capture, you need to choose the Capture tab in the Schedule interface.
Steps:
1. Enter the Record Schedule interface.
Menu>Record/Capture>Schedule
2. Configure Record Schedule
1) Select Record/Capture Schedule.
Figure 5. 6 Record Schedule
2) Choose the camera you want to configure.
3) Select the check box after the Enable Schedule item.
4) Click Edit button or click on the color icon under the edit button and draw the schedule
line on the panel.
Edit the schedule:
I. In the message box, you can choose the day to which you want to set
schedule.
To Next Page
Loading...
Need help?
General
