User Manual of DS-9600/8600/7700/7600 Series NVR
223
14.4 Configuring More Settings for Device
Parameters
Steps:
1. Enter the General Settings interface.
Menu >Configuration>General
2. Click the More Settings tab to enter the More Settings interface, as shown in Figure 14. 4.
Figure 14. 4 More Settings Interface
3. Configure the following settings:
• Device Name: Edit the name of NVR.
• Device No.: Edit the serial number of NVR. The Device No. can be set in the range
of 1~255, and the default No. is 255. The number is used for the remote and
keyboard control.
• CVBS Output Brightness: Adjust the video output brightness.
• Operation Timeout: Set timeout time for menu inactivity. E.g.,when the timeout
time is set to 5 Minutes, then the system will exit from the current operation menu to
live view screen after 5 minutes of menu inactivity.
• Menu Output Mode: You can choose the menu display on different video output.
There are auto, HDMI, VGA and Main CVBS selectable.
4. Click the Apply button to save the settings.
To Next Page
Loading...
Need help?
General
