User Manual of DS-9600/8600/7700/7600 Series NVR
43
The DS-7600/7700NI-SP series NVR provides 8 PoE interfaces which can connect to 8 network
cameras directly; and if you disable the PoE interface, you can also connect to the online network
cameras. And the PoE interface supports the Plug-and-Play function.
Example:
As for 7608/7708NI-SP NVR, when you want to connect 2 online cameras and connect 6 network
cameras via PoE interfaces, you must disable 2 PoE interface in the Edit IP camera panel.
To add Cameras for NVR supporting PoE function:
Before you start:
Connect the network cameras via the PoE interfaces.
Steps:
1. Enter the Camera Management interface.
Main menu> Camera> Camera
You can see the connected cameras are listed.
Figure 2. 18 List of Connected Cameras
Note: The cameras connecting to the PoE interface cannot be deleted in this menu.
Click the Edit button.
Figure 2. 19 Edit IP Camera Interface
Note: Plug-and-Play means that the camera is connected to the PoE interface, so in this case,
the parameters of the camera can’t be edited. The IP address of the camera can only be edited
To Next Page
Loading...
Need help?
General
