Digital Video Recorder User Manual
10
channel.
Note
This function is only available for certain models.
Go to System → General, and check Enhanced IP Mode.
1.6 Connect PoC Camera
The devices of /P series can detect the connected PoC cameras automatically, manage the power
consumption via the coaxial communication, and provide power to the cameras via coaxitron.
Before You Start
● Ensure your device supports PoC (Power over Coaxitron) cameras connection.
● Connect the PoC camera to the DVR.
Steps
1. Go to Menu → Camera → PoC Status.
2. Turn on the PoC for the channel(s) as your desire.
3. Check the status of connected PoC camera.
● If the power consumption of the DVR is lower than that of AF camera, when AF or AT camera
is connected, there is no video and “Insufficient Power for PoC” is overlaid on the live view
image.
● If the power consumption of the DVR is higher than that of the AF camera and lower than
that of the AT camera, when AF camera is connected, it is powered on normally; when AT
camera is connected, it is powered on and then powered off, and there is no video and
“Insufficient Power for PoC” is overlaid on the live view image.
● If the power consumption of the DVR is higher than that of the AT camera, when AF or AT
camera is connected, it is powered on normally.
4. Check the connected AF or AT camera number and the connectable camera number.
To Next Page
Loading...
Need help?
General