HIKVISION DS-KD-DIS User Manual

Figure 7-7 Port Sengs
2. Set the ports of the device.
HTTP Port
The default port number is 80, and it can be changed to any
port No. which is not occupied.
HTTPS Port
The default port number is 443, and it can be changed to any
port No. which is not occupied.
RTSP Port
The default port number is 554.
Server Port
The default server port number is 8000, and it can be
changed to any port No. ranges from 2000 to 65535.
3. Click Save to enable the
sengs.
SIP Seng
Steps
1. Click Network → Basic Sengs → SIP to enter the sengs
page.
Figure 7-8 SIP Sengs
2.
Check Enable VOIP Gateway.
3. Congure the SIP parameters.
4. Click Save to enable the sengs.
FTP Sengs
Steps
1. Click Network → Advanced → FTP to enter the
sengs page.
62

HIKVISION DS-KD-DIS Specifications

General

Brand	HIKVISION
Model	DS-KD-DIS
Category	Intercom System
Language	English