HIKVISION DS-KH6350-WTE1 - Page 29

Figure 3-21 Set Indoor Staon No.
2.
Select Indoor Staon to set the room informaon, live view duraon, SIP parameters and
password.
Room
Informaon
You can set room name, oor No., and room No. Tap Advanced Sengs to set community
No., building No. and unit No. if you need.
Note
●
Community No., building No., and unit No. can be omied if there is no such informaon.
●
If there are two indoor staons that are in the same building, and should call each other,
enter the the room No. directly to call.
●
If there are two indoor
staons that are in two buildings, and should call each other, enter
the building No. and the room No. to call. For examle, call 1-405 to call room 405 in
building 1.
Live View Duraon
You can set the duraon of live view.
SIP Sengs
You can set SIP parameters. For more details, please refer to: SIP Sengs
Password Sengs
You can set unlock password and duress code.
3.
Select Indoor Extension to set the room
informaon, live view duraon, registraon password
and enable SIP 1.0 according to your needs.
Network Indoor Staon Conguraon Guide
20