HIKVISION DS-KH6350-WTE1 User Manual

3.8 System Sengs
You can format or install TF card, clear the screen, view the version informaon of the indoor
staon and reboot the system on the sengs page.
General Sengs
Tap Sengs → to enter the general sengs page.
Figure 3-36 General Sengs Page
Time and Date
Set the displayed me and date format, current me. Tap Sync Time and enable NTP to
synchronize the device
me. You can also enable DST and set the DST start me, end me and
bias.
Note
●
Make sure your device is connected with the network or the NTP funcon will not available.
●
For details, see Synchronize Time .
System Language
Tap System Language to change the system language.
Note
The indoor staon supports 19 languages.
Network Indoor Staon Conguraon Guide
35

HIKVISION DS-KH6350-WTE1 Specifications

General

Color	Yes
Connectivity technology	Wired & Wireless
Number of displays supported	1
Maximum number of cameras supported	-
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	128 GB
Flash memory	32 MB
Internal memory	128 MB
Alarm input channels	8
Operating system installed	Embedded LINUX
Package weight	683 g
Outdoor unit included	No
Display diagonal	7 \
Touchscreen type	Capacitive
Display resolution	1024 x 600 pixels
Display technology	TFT
Product color	Black
Voice codecs	G.711a, G.711u
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet interface type	Fast Ethernet
Supported network protocols	TCP/IP, SIP, RTSP
Power consumption (typical)	8 W

Weight and Dimensions

Depth	21 mm
Width	175 mm
Height	113.5 mm
Weight	355 g