HIKVISION DS-KH6350-WTE1 User Manual

Figure 3-33 Hik-Connect Service Sengs Page
4.
Enable Enable Hik-Connect Service.
5.
Edit LBS server and Vericaon Code.
Note
●
Vericaon code is used to add the device to mobile client.
●
You can tap to enable or disable vericaon code reveal.
6.
View the service status on the page.
7.
Oponal: Scan the QR code on the screen.
Note
●
Scan the le QR code on the screen to download Hik-Connect.
●
Scan the right QR code on the screen to add the device to the mobile client.
3.7.2 Unlink the Account
Remove the account from the mobile client.
Steps
1.
Tap Sengs → → Conguraon , and enter the admin (acvaon) password.
2.
Tap to enter the system maintenance page.
Network Indoor Staon Conguraon Guide
33

HIKVISION DS-KH6350-WTE1 Specifications

General

Color	Yes
Connectivity technology	Wired & Wireless
Number of displays supported	1
Maximum number of cameras supported	-
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	128 GB
Flash memory	32 MB
Internal memory	128 MB
Alarm input channels	8
Operating system installed	Embedded LINUX
Package weight	683 g
Outdoor unit included	No
Display diagonal	7 \
Touchscreen type	Capacitive
Display resolution	1024 x 600 pixels
Display technology	TFT
Product color	Black
Voice codecs	G.711a, G.711u
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet interface type	Fast Ethernet
Supported network protocols	TCP/IP, SIP, RTSP
Power consumption (typical)	8 W

Weight and Dimensions

Depth	21 mm
Width	175 mm
Height	113.5 mm
Weight	355 g