HIKVISION DS-KH6350-WTE1 User Manual

Note
1 to 32 characters are allowed. Supports uppercase leers, lowercase leers, numerics, and
special characters.
Remain Open
Enable the funcon, the relay remains open.
Disabled the
funcon, and you can set the remain open duraon.
Note
●
By default, the funcon is disabled.
●
1 to 180 s are available to set.
Hide on Main Page
Enable the funcon and the relay buon will be displayed on the main page. You can control
the relay status manually on the main page.
Disabled the
funcon and the relay buon will no be displayed on the main page.
3.10 Device
Informaon
View the device informaon, including the version, model, serial No. and open source disclaimer.
Steps
1.
Tap Sengs → → Device Informaon to enter the Device Informaon page.
2.
View the device version, model, and serial No.
3.
Oponal: Tap Open Source Disclaimer to view the OSS statement.
Network Indoor Staon Conguraon Guide
40

HIKVISION DS-KH6350-WTE1 Specifications

General

Color	Yes
Connectivity technology	Wired & Wireless
Number of displays supported	1
Maximum number of cameras supported	-
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	128 GB
Flash memory	32 MB
Internal memory	128 MB
Alarm input channels	8
Operating system installed	Embedded LINUX
Package weight	683 g
Outdoor unit included	No
Display diagonal	7 \
Touchscreen type	Capacitive
Display resolution	1024 x 600 pixels
Display technology	TFT
Product color	Black
Voice codecs	G.711a, G.711u
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet interface type	Fast Ethernet
Supported network protocols	TCP/IP, SIP, RTSP
Power consumption (typical)	8 W

Weight and Dimensions

Depth	21 mm
Width	175 mm
Height	113.5 mm
Weight	355 g