Steps
Note
This funcon is only supported by the device the connecon mothod of which is TCP/IP when
adding the device.
1.
In the organizaon list on the le, select an organizaon to import the persons.
2.
Click Get from Device to pop up the dialog box.
3.
The added device will be displayed.
4.
Click to select the device and then click Get to start
geng the person informaon from the
device.
Note
●
The person informaon, including person details, person's ngerprint informaon (if
congured), and the linked card (if congured), will be imported to the selected organizaon.
●
If the person name stored in the device is empty, the person name will be lled with the
issued card No.
aer imporng to the client.
Modify and Delete Person
Select the person and click Edit to open the eding person dialog.
To delete the person, select a person and click Delete to delete it.
Note
If a card is issued to the current person, the linkage will be invalid aer the person is deleted.
Change Person to Other Organizaon
You can move the person to another organizaon if needed.
Steps
1.
Select the person in the list and click Change Organizaon.
2.
Select the organizaon to move the person to.
3.
Click OK to save the
sengs.
Network Indoor Staon Conguraon Guide
68