HIKVISION DS-KH8350-TE1 User Manual

Figure 3-33 Hik-Connect Service Sengs Page
4.
Enable Enable Hik-Connect Service.
5.
Edit LBS server and Vericaon Code.
Note
●
Vericaon code is used to add the device to mobile client.
●
You can tap to enable or disable vericaon code reveal.
6.
View the service status on the page.
7.
Oponal: Scan the QR code on the screen.
Note
●
Scan the le QR code on the screen to download Hik-Connect.
●
Scan the right QR code on the screen to add the device to the mobile client.
3.7.2 Unlink the Account
Remove the account from the mobile client.
Steps
1.
Tap Sengs → → Conguraon , and enter the admin (acvaon) password.
2.
Tap to enter the system maintenance page.
Network Indoor Staon Conguraon Guide
33

HIKVISION DS-KH8350-TE1 Specifications

General

Color	Yes
Certification	FCC, IC, CE, C-TICK, REACH, WEEE, UL, CB, RCM
Connectivity technology	Wired
Sustainability certificates	RoHS
Number of displays supported	-
Voice codecs	G.711u
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	32 GB
Power consumption	200 mA
Indoor unit power type	DC
Power consumption (typical)	7 W
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
Display diagonal	7 \
Touchscreen type	Capacitive
Display resolution	1024 x 600 pixels
Display technology	IPS
Proper use	Indoor
Product color	Black, Grey
Placement supported	Horizontal
Package weight	786 g
Outdoor unit included	No
Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet interface type	Fast Ethernet
Ethernet LAN (RJ-45) ports	1
Supported network protocols	TCP/IP, SIP, RTSP

Weight and Dimensions

Depth	22.4 mm
Width	180 mm
Height	140 mm
Weight	600 g