HIKVISION DS-KH8350-TE1 User Manual

3.8 System Sengs
You can format or install TF card, clear the screen, view the version informaon of the indoor
staon and reboot the system on the sengs page.
General Sengs
Tap Sengs → to enter the general sengs page.
Figure 3-36 General Sengs Page
Time and Date
Set the displayed me and date format, current me. Tap Sync Time and enable NTP to
synchronize the device
me. You can also enable DST and set the DST start me, end me and
bias.
Note
●
Make sure your device is connected with the network or the NTP funcon will not available.
●
For details, see Synchronize Time .
System Language
Tap System Language to change the system language.
Note
The indoor staon supports 19 languages.
Network Indoor Staon Conguraon Guide
35

HIKVISION DS-KH8350-TE1 Specifications

General

Color	Yes
Certification	FCC, IC, CE, C-TICK, REACH, WEEE, UL, CB, RCM
Connectivity technology	Wired
Sustainability certificates	RoHS
Number of displays supported	-
Voice codecs	G.711u
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	32 GB
Power consumption	200 mA
Indoor unit power type	DC
Power consumption (typical)	7 W
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
Display diagonal	7 \
Touchscreen type	Capacitive
Display resolution	1024 x 600 pixels
Display technology	IPS
Proper use	Indoor
Product color	Black, Grey
Placement supported	Horizontal
Package weight	786 g
Outdoor unit included	No
Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet interface type	Fast Ethernet
Ethernet LAN (RJ-45) ports	1
Supported network protocols	TCP/IP, SIP, RTSP

Weight and Dimensions

Depth	22.4 mm
Width	180 mm
Height	140 mm
Weight	600 g