HIKVISION DS-KIS701 User Manual

DS-KIS701 Video Intercom Bundle Quick Start Guide
QSG DS-KIS701 Video Intercom Bundle 080519NA 21
4.2
4.24.2
4.2 Editing Network
Editing NetworkEditing Network
Editing Network Par
ParPar
Parameters
ametersameters
ameters
Purpose
PurposePurpose
Purpose
To operate and configure the device via a LAN (Local Area Network), you need connect the device
to the same subnet as your PC. You can edit the network parameters via the batch configuration
tool and iVMS-4200 software. Here we take editing network parameters via the batch configuration
tool in the following example.
Figure 20, Click Edit NET Parameters
Edit NET ParametersEdit NET Parameters
Edit NET Parameters Button
1. Select an online activated device and click the Edit NET Parameters
Edit NET ParametersEdit NET Parameters
Edit NET Parameters button.
2. Change the device IP
IPIP
IP A
AA
Address
ddressddress
ddress and G
GG
Gateway
atewayateway
ateway A
AA
Address
ddressddress
ddress to the same subnet as your computer.
3. Enter the password and click the OK
OKOK
OK button to activate the network parameters modification.
Figure 21, Edit Network Parameters
• The default port no. is 8000.
• After editing the device network parameters, add the device(s) to the device list again.
4.3
4.34.3
4.3 Adding
AddingAdding
Adding Device
DeviceDevice
Device
For the batch configuration tool and iVMS-4200 software, add the device to the software to
configure the device remotely.

HIKVISION DS-KIS701 Specifications

General

Brand	HIKVISION
Model	DS-KIS701
Category	Intercom System
Language	English