DS-KIS701 Video Intercom Bundle Quick Start Guide
QSG DS-KIS701 Video Intercom Bundle 080519NA 14
Mount Indoor Station
Mount Indoor StationMount Indoor Station
Mount Indoor Station
Before
Before Before
Before You Start
You StartYou Start
You Start
•
Make sure the device in the package is in good condition.
•
Make sure all related equipment is powered off during the installation.
•
Connect cables to the indoor station before mounting.
1.
Affix the wall mounting plate to the wall with two screws.
2.
Hook the indoor station to the wall mounting plate tightly by inserting the plate hooks into the
indoor station’s rear panel slots, during which the lock catch will lock automatically.
Figure 10, Hooking the Indoor Station to the Plate
3.2
3.23.2
3.2
Door Station
Door StationDoor Station
Door Station
Installation
InstallationInstallation
Installation
The door stations support flush mounting and surface mounting.
Flush
FlushFlush
Flush
Mounting
MountingMounting
Mounting
Installation Accessory Description
Installation Accessory DescriptionInstallation Accessory Description
Installation Accessory Description
To install the door station onto the wall, you must use a matching gang box. The gang box
dimensions are shown below.