HIKVISION DS-KIS701 User Manual

DS-KIS701 Video Intercom Bundle Quick Start Guide
QSG DS-KIS701 Video Intercom Bundle 080519NA 23
1. Click the button to pop up the adding devices dialog box.
Figure 24, Click Adding Button
2. Select IP Address
IP AddressIP Address
IP Address in the adding mode drop-down list.
3. Enter the IP A
IP AIP A
IP Address
ddressddress
ddress, and set the device port no., user name, and password.
Figure 25, Add by IP Address
4. Click the OK
OK OK
OK button to add the device to the device list.
• You cannot add the device(s) to the device list if the user name and password are not identical.
• When you add devices by IP Address
IP AddressIP Address
IP Address or IP
IPIP
IP Segment
SegmentSegment
Segment, the devices should be online.
4.4
4.44.4
4.4 Set Indoor
Set IndoorSet Indoor
Set Indoor Station
StationStation
Station
Set Room
Set RoomSet Room
Set Room No.
No.No.
No.
• You can set the indoor station no. via the batch configuration tool remotely. You can dial the
Roo
RooRoo
Room No.
m No.m No.
m No. to call the indoor station resident.
• Make sure you have activated the indoor station, and add it to the batch configuration tool.
1. Click Remote Configuration
Remote ConfigurationRemote Configuration
Remote Configuration >
> >
> ID Configuration
ID Configuration ID Configuration
ID Configuration to enter the ID C
ID CID C
ID Configuration
onfigurationonfiguration
onfiguration page.

HIKVISION DS-KIS701 Specifications

General

Brand	HIKVISION
Model	DS-KIS701
Category	Intercom System
Language	English