Panic Alarm Station User Manual
39
3. You can also click Default Value to restore the default values.
Event Settings 4.2.6
Schedule Settings
Click Remote Configuration > Events > Schedule to enter the record schedule configuration interface.
Record Schedule Settings
Steps:
1. Select the camera needs to be configured.
2. Check the checkbox of Local Recording to enable the device local recording. You can also check ANR checkbox to enable the
device continuing recording even if the network is off.
3. Select from the drop-down list to set the recording type including Main Stream and Sub Stream.
4. Click the icon to set the record schedule.
5. Click Edit to enter the Templates Management interface. Select the template to be set and you can edit the template name.
6. Set the time schedule for the selected template.
When the cursor turns to , you can edit the schedule time bar.
When the cursor turns to , you can move the selected time bar you just edited.
When the cursor turns to , you can lengthen or shorten the selected time bar.
To Next Page
Loading...
Need help?
General
