Panic Alarm Stationļ User Manual
42
4. Select the linked siren, alarm lamp, linked trigger and others.
5. Click Copy to to copy all these settings to other zones.
6. Click Save to save the settings.
Four zone types in the Zone Parameters: Instant Zone, Fire Alarm Arming Zone, 24 Hour Non-voiced Zone and Shield
Zone.
Alarm is sent out without any delay once the detector is triggered.
When the 24-hour armed zone is triggered by fire alarm, sirens will send out
resonant and special sound.
When the 24-hour armed zone is triggered, it will send alarm reports to the
surveillance center without any audible warning. The 24 hour silence alarm
zone is not affected by manual or scheduled arming/disarming.
The alarm will not be triggered.
Panic alarm station has three zones among which two are ordinary zones and one is emergency zone.
Zone Event Settings 4.3.2
Steps:
1. Click Control Panel > Event Management > Zone Event to enter the Zone Event configuration interface.
2. Select the corresponding zone on the left and then tick necessary items.
3. (Optional) Click Copy to to tick the necessary items.
To Next Page
Loading...
Need help?
General
