QSG EKI-K41B44W Kit 110520NA 6
Cautions
For Network Camera:
●
CAUTION: Hot parts! Burned fingers when handling the parts.
Wait one-half hour after switching off before handling parts. This sticker is to indicate that the marked
item can be hot and should not be touched without taking care. For device with this sticker, this
device is intended for installation in a restricted access location, access can only be gained by
service persons or by users who have been instructed about the reasons for the restrictions applied to
the location and about any precautions that shall be taken.
●
Make sure the power supply voltage is correct before using the camera.
●
Do not drop the camera or subject it to physical shock.
●
Do not touch sensor modules with fingers. If cleaning is necessary, use clean cloth with a bit of
ethanol and wipe it gently. If the camera will not be used for an extended period, please replace the
lens cap to protect the sensor from dirt.
●
Do not aim the camera at the sun or extra bright places. Blooming or smearing may occur otherwise
(which is not a malfunction), and affect the endurance of sensor at the same time.
●
The sensor may be burned out by a laser beam, so when any laser equipment is in using, make sure
that the surface of sensor will not be exposed to the laser beam.
●
The operating temperature shall be -30°C to +60°C (-22° to +140° F). Do not place the camera in
extremely hot, cold, dusty or damp locations, and do not expose it to high electromagnetic radiation.
●
To avoid heat accumulation, good ventilation is required for operating environment.
●
Keep the camera away from liquid while in use.
●
While in delivery, the camera shall be packed in its original packing, or packing of the same texture.
●
Regular part replacement: a few parts (e.g. electrolytic capacitor) of the equipment shall be replaced
regularly according to their average enduring time. The average time varies because of differences
between operating environment and using history, so regular checking is recommended for all the
users. Please contact with your dealer for more details.
●
This equipment is not suitable for use in locations where children are likely to be present.
●
CAUTION: Risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries
according to the instructions
ATTENTION: IL Y A RISQUE D'EXPLOSION SI LA BATTERIE EST REMPLACÉE PAR UNE BATTERIE DE TYPE INCORRECT.
METTRE AU REBUT LES BATTERIES USAGÉES CONFORMÉMENT AUX INSTRUCTIONS
●
Improper replacement of the battery with an incorrect type may defeat a safeguard (for example, in the
case of some lithium battery types).
To Next Page
Loading...
Need help?
General
