Digital Video Recorder User Manual
48
Enter the playback interface and start playing back the video
of the selected channel immediately.
A shortcut to enter the PTZ control interface of the selected
camera.
Output Mode is configurable with Standard, Bright, Gentle
and Vivid options.
Switch to the auxiliary output mode and the operation for the
main output is disabled.
If you enter Aux monitor mode and the Aux monitor is not connected,
the mouse operation is disabled. You need to switch back to the Main
output with the F1 button on front panel or VOIP/MON button on IR
remote control and then press the Enter button.
Figure 3-1 Right-click Menu
3.2.2 Switching Main/Aux Output
Refer to Chapter 3.2 Operations in Live View Mode for the main and aux output
relationship.
The CVBS output only serves as the aux output or live view output.
Step 1 Use the mouse wheel to double-click on the HDMI1/VGA, or HDMI2, or HDMI/VGA
output screen, and the following message box pops up.
To Next Page
Loading...
Need help?
General
